Monitor Accessories

Monitor Accessories

Special accessories expand the capabilities of Geist's monitoring products.

Tabs

Overview
-48V DC Power Supply

-48 Volt DC Power Supply

Tabs

Overview

The -48 Volt DC Power Supply delivers power to any Geist environmental monitor.


Input voltage: -48 VDC to -36 VDC
Output voltage: 6 VDC
Output Current: 1A
Warranty: One year




5-Port Splitter

5-Port Splitter

Tabs

Overview

This five port splitter makes the installation for multiple remote sensors easy. Chain them together to connect up to 16 sensors. Comes with one RJ-12 plug, five receptacles, and four-foot cord.

5-Port Splitter Spec Sheet




POE Splitter

POE Splitter

Tabs

Overview

POE Splitter and Injector KitThe Level One Power over Ethernet Splitter (PoE splitter) has the option of outputting a 5VDC or 12VDC power signal from the -48VDC on the Data In port. Set 5V or 12V with the dip switch located on the side of the unit.


  • Power any RS units over Ethernet cable *
  • Simple connection
  • Saves wiring—remote power supply
  • 300-foot maximum length
  • No software required

POE Splitter and Injector Kit Spec Sheet




Auto-Dialers

PSTN and GSM Auto-Dialers

Tabs

Overview

The relay controlled PSTN and GSM auto-dialers add an additional level of alert notification. The units are especially ideal for notifications in the unusual event of a network failure and also for alert notifications from remote locations where a network connection is not available for SNMP or email alerts. Battery back-up ensures that the auto-dialer can still deliver alerts even if its power source is lost. The dialer can be programmed to call up to nine different phone numbers and play a pre-recorded message to each person who answers, until the message is acknowledged. The dialer contains two triggers. Each trigger can have its own pre-recorded message.

Both dialers connect to the relay output port on an environmental monitor. The GSM receives a SM card and the PSTN uses a standard telephone line.

PSTN Spec Sheet

GSM Spec Sheet




IP Camera

D-Link DCS-930L

Tabs

Overview

DCS-930LWant to monitor your server room? This easy-to-install wireless network camera makes it simple and affordable.

The D-Link® Wireless G Network Camera (DCS-930L) connects to a wireless (or wired) network to provide remote high-quality video surveillance. With its sleek compact design, the DCS-930L is an affordable network camera ideal for your home or small business. Since the DCS-930L is a wireless camera, you can place it in areas that have no access to an Ethernet (wired) connection, such as ceilings or high walls. Additionally, with support for WPA®-PSK and WPA2®, the DCS-920 provides you with the highest level of security when connecting to your wireless network, enabling you to stream high-quality MJPEG video quickly and easily to your computer.

EASY NETWORK SETUP

The DCS-930L adheres to the Universal Plug & Play (UPnP®) specification, which allows for automatic detection and addition to a network.

Works with the mydlink iPhone app for on-the-go viewing.

Spec Sheet--DCS930L